Jiffy-TapUnit Size & Weight:The Jiffy-Tap unit is the smallest lead screw tapping unit for the power. The maximum length of a unit from tap adapter bushing to back of hydraulic motor is 20". Jiffy-Tap units have a 6 HP capability, yet will mount side-by-side on 3-5/16" spacing. On Special order this can be reduced to 3-3/16". The height of the Jiffy-Tap unit is 5-1/2". The length of the Jiffy-Tap unit is dependent upon the size of the hydraulic motor and the style of tap holding. Drawings are available for each combination from the factory or you can download a drawing that demonstrates these variations. See our download section for additional information on sizes The average weight of a Jiffy-Tap unit is 28 lbs. |