Jiffy-DrillAppearance:Jiffy-Drill is the light, powerful, and compact answer to production drilling, reaming, spot facing, and similar operations. It will drill holes up through 1-1/2" diameter in steel with ample allowance for dull bits.
The standard Jiffy-Drill unit is supplied with a number 3 Morse taper. Optional spindles can be specified to meet your tooling needs. It is difficult to change out only the spindle in the field. If you must change the spindle, it is recommended that you also change out the drive shaft and bearing. Consult the factory on these special cases. |
